Electric Linear Actuator A Bottom Fixed Mounting Flat Plate Bracket (Model 0043072) 4 Channels DC Power Output How to Set Working Mode

How to Set Working Mode of Wireless Switch

from 12 mm/second to 50 mm/second

4) Connect the positive pole of DC power supply to the brown wire of the controller and connect the negative pole of DC power supply to the blue wire of the controller

When the joystick is in the middle position

) Max Load Capacity 200 N / 20 kg / 40 lbs at 45mm/s (Linear actuator can get maximum load capacity when it operates in the vertical direction

Electric Linear Actuator A Bottom Fixed Mounting Flat Plate Bracket (Model 0043072) 4 Channels DC Power Output How to Set Working ModeEach linear actuator would require two mounting brackets, one to fix the head of linear actuator and another to fix the bottom of linear actuator. This flat plate bracket is used to mount vertically on the bottom of the linear actuator A . Includes a flat plate bracket, truncated original base of linear actuator, a copper ring, and three M4 screws. Aluminum material. Size: 95 x 70 x 6 mm (3. 7 x 2. 8 x 0. 24 inches) Diameter of the four outer mounting