Torquata Edge Banding Groove Cutter Router Bit Set 1/2in Shank Tongue & Groove Router Bits make a plug with the

make a plug with the middle bit to fill a hole made with the smallest bit

Dust the finished surface with TRIPOLI POWDER directly from the shaker and rub the surface with a medium pressure using a clean soft rag or the palm of your hand until you have the surface evenly dulled

43kg (95 lbs)

The handles are made of solid 17mm solid steel bar so they will never bend over the lifetime of the vice

they are perfect for using at the bottom of a chute – such as that of a jointer

Torquata Edge Banding Groove Cutter Router Bit Set 1/2in Shank Tongue & Groove Router Bits make a plug with theEdge Banding Groove Cutters for invisible joinery Simply centre and run the groove cutter along the edge of your veneered MDF or ply board to cut the 60 profile and then centre and run the tongue cutter along your timber edging to match the veneer to create a snug, strong and virtually invisible joint. Suits material 12. 7 25. 4mm thick. 1 2in shank edge banding groove set You can even run the timber edging taller than the main board to create the