Quarter Inch (1/4") Foot, SLANT SHANK Patchwork Piecing Quilting attachments This is a slide bobbin

This is a slide bobbin cover plate for a Singer Sewing Machine models 401 (401A)

most of the Hemstitcher Attachments are completely unusable with hard

Lori's patterns are clear

the guide bar is taken from the foot by pulling it to the right until it is released from the clamp

Take a look at the photos above and you'll see some very special features to this cover

Quarter Inch (1/4") Foot, SLANT SHANK Patchwork Piecing Quilting attachments This is a slide bobbinThe measurement this foot provides is closer to a true 1 4". The difference between the Patchwork 1 4 inch foot versus the one with the little black guide on the side, is that this one has the additional guide for patchwork and the 1 4" seam is based on the right edge of the front toe perfectly in line for a 1 4" seam throughout your entire project. This foot also has two red marked guides perpendicular to the seam being stitched. LOW SHANK: fits the