RGS - Bridge Riser Block Set Clamps This TrueTrac Saw adapter kit

This TrueTrac Saw adapter kit includes a track saw adapter plate

If you've already got the TrueTrac Saw System the 24 inch track can be used as a crosscut track as well

track saw guide rail set

Does not extend more than 57 inches

Includes a total of 153 inches of track consisting of one (1) 57-inch and two (2) 48-inch sections with dovetail connectors

RGS - Bridge Riser Block Set Clamps This TrueTrac Saw adapter kitEasily add thickness capacity to any RGS unit by adding these Bridge Riser Blocks between the bridge extrusions and long axis linear slides! Each set contains four blocks with associated hardware and will raise the bridge extrusions by 3 4 inch. One Foundation Set is required for the first 3 4 inch lift and are engraved with an "F". Additional increases are handled with Riser Sets and each set will add a similar 3 4 inch to the capacity. Riser Sets