Burgtec Ti Offset Shock Hardware - Single - M8x21.8 Bar Clamp Diameter (mm)-31.8 } Cutter for most types

} Cutter for most types of reinforced hydraulic tubing (not for braided stainless)

45 x 45 Degree AC sealed bearings

Featuring a dual phased-pawl drive mechanism accomplishing 90 points of engagement and 4 degree engagement by way of a six pawl driver and 45 tooth drive ring

They also work great on SRAM direct mount cranksets

Fits all standard mountain handlebars and most drop bars (except being ergonomic drop bars that have hard angles in the drops)

Burgtec Ti Offset Shock Hardware - Single - M8x21.8 Bar Clamp Diameter (mm)-31.8 } Cutter for most typesEccentric design allows the head angle to be changed by 1 to 1. 5 degrees and bottom bracket height to lower or raise by shortening or lengthening the effective eye to eye of the shock Slacken the head angle for steeper courses or steepen it for sprinting 6mm hardware provides the greatest amount of alteration Used on World Cup circuit by many of the top riders Made from Grade 5 titanium, which is significantly lighter than steel hardware Sets of 2